Home > Cage Building Supplies > Tools & Fasteners
Sort By:
Page of 1
J-Clip Fasteners J-Clip Fasteners

J-Clip fasteners for repairing cages and cage building. For use with J-Clip pliers - Item No. CBS127
Comes in 2 sizes: 1/2 lb and 1 lb

Starting At: $6.95
Galvanized Hog Ring Pliers Economy Galvanized Hog Ring Pliers

Galvanized Hog Ring Pliers for use in wire cage building

Starting At: $7.95
Metal Cage Clips Metal Cage Clips - .5LB

These cage clips are perfect for cage building or repair. Cage clips are 1mm wide x 1mm high. Sold in a 1/2lb bag (approximately 500 clips)

Starting At: $8.95
1/2" Galvanized Blunt Point Hog/Pen Rings 1LB 1/2" Galvanized Blunt Point Hog/Pen Rings 1LB

1/2" ID Galvanized Rings. Used to join wire panels in cages. Required tool for these rings is CBS101

Starting At: $9.95
Heavy Duty Pliers for Metal Cage Clips Heavy Duty Pliers for Metal Cage Clips

Heavy duty pliers used with metal cage clips

Starting At: $12.95
Heavy Duty 6" Flat Edge Wire Cutters Heavy Duty 6" Flat Edge Wire Cutters

Heavy duty 6" wire cutters with a flat edge cut!

Starting At: $12.95

(1)
1/2" Stainless Steel Blunt Point Hog/Pen Rings 1LB 1/2" Stainless Steel Blunt Point Hog/Pen Rings 1LB

1/2" ID Stainless Steel Rings. Used to join wire panels in cages. Required tool for these rings is CBS101

Starting At: $12.95
Heavy Duty Hog Ringer with Spring Heavy Duty Hog Ring Pliers with Spring

Heavy duty hog ring pliers have a spring and latch to close them. They are 6.7" in length.

Starting At: $14.95
Ion Tool Heavy Duty Comfort Grip J Clip Pliers Ion Tool Heavy Duty Comfort Grip J Clip Pliers

Made with forged steel and comfort grips, the ION TOOL J-Clip Pliers can be used to build or repair wire cages or hutches for rabbits, chickens, and birds, or use to them build traps, rock cages, and more.

Starting At: $16.95
600 Hog Rings for Auto Feed Hand Held Hog Ringer 600 Hog Rings for Auto Feed Hand Held Hog Ringer

Hog Rings for Auto Feed Hand Held Hog Ringer. 600 Qty

Starting At: $16.95
Heavy Duty 6" Cable/Wire Cutters Heavy Duty 6" Cable/Wire Cutters

Heavy duty 6" cable/wire cutters for cage building. Sold individually

Starting At: $16.95
Heavy Duty Clip Pliers Heavy Duty Ferrule Clip Pliers

Heavy duty clip pliers that are an improved version of the forged steel pliers that have been the industry standard for years. Our tool is bright zinc plated to prevent rust and fitted with soft plastic grips for comfort. Works perfect with ferrule clips

Starting At: $17.95
Metal Cage Clips and Heavy Duty Pliers Kit Metal Cage Clips and Heavy Duty Pliers Kit

These cage clips are perfect for cage building or repair. This kit contains .25lb of cage clips (approx. 250 clips) and 1 pair of heavy duty cage clip pliers. Cage clips are 1mm wide x 1mm high.

Starting At: $20.95
Heavy Duty Clip Remover Pliers Heavy Duty Clip Remover Pliers

Heavy duty clip remover pliers easily remove cage clips

Starting At: $23.95

(1)
Heavy Duty Auto Feed Hand Held Hog Ringer Heavy Duty Auto Feed Hand Held Hog Ringer with 600 Hog Rings

A handy tool to have for cage building and repair! The heavy duty hand held hog ringer has an auto feed for hog rings to make the job easier. This set comes with 600 collated 5/8" hog rings that are ready to load.

Starting At: $29.95
Hartco Collated Metal Clips - E-Clip 64A18SG Hartco Collated Metal Clips - E-Clip 64A18SG

Hartco strip format polycord collated metal clips, galvanized. For use with Hartco Eclipser 2000-1926 pneumatic clinching tool. Box contains 10,340 clips

Starting At: $79.95
Air Cutter, Standard Duty (MR30A-CR8P) Air Cutter, Standard Duty (MR30A-CR8P) Up to 12-Gauge Mild Steel Wire

Pneumatic hand-held cutting tool for 12, 14 & 16 gauge wire, with or without PVC-coating. The Air Cutter’s single piston design, comfortable size grip, and sturdy, high quality components deliver the efficiency and consistency needed for fabrication work in many industries. Includes cutting tool and flush CR8P cutting blade.

Starting At: $399.95
Hartco Eclipser 2000-1926 Clinch Clip Tool Hartco Eclipser 2000-1926 Clinch Clip Tool

Hartco Eclipser 2000-1926 Clinch Clip Tool (Thin & Narrow Cage) Hand-held, manually operated, lightweight pneumatic clip clinching tool that uses clips in strips. Used exclusively for cage and trap building when tight access is required, such as 14ga or 16ga 1/2″ x 1/2″ welded mesh. This tool is a special order and will have a 1 week lead time.

Starting At: $575.00